Send inquiry
1. AlNiCo guitar pickup magnet
AlNiCo pickup magnet is hard and brittle. Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances.
2.AlNiCo Magnet Characteristics
3.Alnico Magnet Surface Treatments
The corrosion resistance of AlNiCo is considered excellent , and no surface treatments are required. However, AlNiCo magnets are easily plated for cosmetic reasons if required.
4.Delivery time
10-15days for sample
25-35 days for mass quanitiy
5.Alnico magnet shows
6.My contact information
AlNiCo pickup magnet is hard and brittle. Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances.
2.AlNiCo Magnet Characteristics
Grade |
Br | Hc | (BH)max | Curie temp | Work temp |
mT GS | ka/m OE | kj/m3 MGOe | |||
LN10 | 600/6000 | 40/500 | 10.00/1.20 | 810 | 450 |
LNG12 | 700/7000 | 44/550 | 12.00/1.50 | 810 | 450 |
LNG13 | 680/6800 | 48/600 | 13.00/1.63 | 810 | 450 |
LNG18 | 900/9000 | 48/600 | 1800/2.25 | 850 | 450 |
LNG37 | 1200/12000 | 48/600 | 37.00/4.63 | 860 | 525 |
LNG40 | 1250/12500 | 48/600 | 40.00/5.00 | 860 | 525 |
LNG44 | 1250/12500 | 52/650 | 44.00/5.50 | 860 | 525 |
LNG52 | 1300/13000 | 56/700 | 52.00/6.5 | 860 | 525 |
LNG60 | 1330/13300 | 60/750 | 60.00/7.5 | 860 | 525 |
LNGT18 | 580/5800 | 90/1130 | 18.00/2.25 | 860 | 550 |
LNGT30 | 1100/11000 | 56/700 | 30.00/3.75 | 860 | 550 |
LNGT32 | 800/8000 | 100/1250 | 32.00/4.00 | 860 | 550 |
LNGT38 | 800/8000 | 110/1380 | 38.00/4.75 | 860 | 550 |
LNGT44 | 850/8500 | 120/1500 | 40.00/5.5 | 860 | 550 |
LNGT48 | 900/9000 | 120/1500 | 48.00/6.00 | 860 | 550 |
3.Alnico Magnet Surface Treatments
The corrosion resistance of AlNiCo is considered excellent , and no surface treatments are required. However, AlNiCo magnets are easily plated for cosmetic reasons if required.
4.Delivery time
10-15days for sample
25-35 days for mass quanitiy
5.Alnico magnet shows
6.My contact information