Send inquiry
Below are the varieties and specifications of Yi Hua plastic tiles:
1. Specification:Thickness:1.0mm-5.0mm
Dimension: 12"×12" ,18 "x18" , 24"x24",12"x24" (squarely)
4"×36" , 6"×36'", 8"x48",9"x48"(plank)
2. Surface embossing: flat, thin, rough, rock, water wave, wood, registered embossing etc.
3. Thickness of vinyl wear layer: 0.15mm-1.0mm;polyurehthane coating, UV wearable.
4. Backing:with glue or not.
All varieties of Yi Hua plastic tiles have below characteristics, which can be chosen by customers in different places.
1. Various color and specification Present series:
2. Fireproof , smokeproof Marble, Carpet Series
3. Wearable, easy in maintenance Plank series
4. Germproof, innocuous Registered embossing series
5. Anlistatig Conductive?anti-slip series
6. Anti-slip Plane & solid series
The products can be used in:
Various kinds of commercial building, office, emporium, airport, hospital, school, supermarket, factory, library, residential house, car exhibition fair etc.
and some special places such as medicine factory?electron assembly plant?hospital etc. that can use anlistatig and anti-slip products.
Installation & Maintenance
Before installation, the existing floor must be flat, stable, dry and clean; Daub the glue onto the floor, 20 to 30 minutes later, do the installation before the glue is thoroughly dry. Flip the tiles lightly with rubber hammer to make them agglutinate firmly; then inspect the defect within one hour. This product is easy in maintenance,mop is enough to make the floor clean.
1. Specification:Thickness:1.0mm-5.0mm
Dimension: 12"×12" ,18 "x18" , 24"x24",12"x24" (squarely)
4"×36" , 6"×36'", 8"x48",9"x48"(plank)
2. Surface embossing: flat, thin, rough, rock, water wave, wood, registered embossing etc.
3. Thickness of vinyl wear layer: 0.15mm-1.0mm;polyurehthane coating, UV wearable.
4. Backing:with glue or not.
All varieties of Yi Hua plastic tiles have below characteristics, which can be chosen by customers in different places.
1. Various color and specification Present series:
2. Fireproof , smokeproof Marble, Carpet Series
3. Wearable, easy in maintenance Plank series
4. Germproof, innocuous Registered embossing series
5. Anlistatig Conductive?anti-slip series
6. Anti-slip Plane & solid series
The products can be used in:
Various kinds of commercial building, office, emporium, airport, hospital, school, supermarket, factory, library, residential house, car exhibition fair etc.
and some special places such as medicine factory?electron assembly plant?hospital etc. that can use anlistatig and anti-slip products.
Installation & Maintenance
Before installation, the existing floor must be flat, stable, dry and clean; Daub the glue onto the floor, 20 to 30 minutes later, do the installation before the glue is thoroughly dry. Flip the tiles lightly with rubber hammer to make them agglutinate firmly; then inspect the defect within one hour. This product is easy in maintenance,mop is enough to make the floor clean.