1,Brief descriptionEasy-start C5 soft starter is a new type of motor soft starter which is developed by the 32 bit ARM core microcontroller. It is a kind of intelligent asynchronous motor soft starting device. It is a set of starting, display, protection, data acquisition in one of the motor terminal control equipment. With fewer components, more complex control functions can be realized. The Chinese and English interface display and make the operation more simple.
2,Effect(I)Reduce the starting current of the motor, to avoid the impact of the power supply system, reduce the distribution capacity, to avoid increasing investment;
(II) Reduce the mechanical impact stress, and extend the service life of the motor and related equipment;
(III)Smooth starting and soft stop to avoid the surge problem, the traditional starting equipment to eliminate the pump water hammer effect;
(IV)Variety of starting mode and wide range of current, voltage and other settings, can adapt to a variety of load conditions, improve process;
(V)Improve the reliable protection, more effective protection of the motor and related equipment safety.
3,Characteristic(I)
Multiple starting mode:Limited current soft starter, voltage index curve, voltage linear curve, current exponential curve, current linear curve, and in every way applied programming process jump starting torque and starting current limit. Depending on the load, the starting curve can be selected to achieve the best starting effect. The unique basic algorithm makes the motor start and stop more accurate and smooth.
(II)
Advanced communication function:Equipped with RS485 communication interface, convenient user network connection control, improve the level of automation and reliability of the system. Embedded Modbus standard protocol, convenient configuration connection.
(III)
Analog signal control:The user can enter the 4~20mA or 0~20mA standard signal, can be simulated on the operating panel, the upper and lower limits set, to achieve the motor, stop control and alarm. Data transfer (pressure, temperature, flow, etc.) can also be transmitted through a soft starter. 4~20mA or 0~20mA standard signal output function.
(IV)
Strong anti-jamming:All external control signals are used in the photoelectric isolation, and set up different anti noise level, which can be adapted to the special industrial environment.
(V)
Two parameter function:Soft starter with two sets of different power motor control parameters, easy (VI)control two different power of the motor.
(VII)
Multiple stop mode: Soft parking, free parking, brake brake, soft stop and brake.
(VIII)
Power frequency adaptive:Power frequency 50/60Hz adaptive function, easy to use.
(IX)
Dynamic fault memory:Can record 15 times the fault, is easy to find the fault reason.
(X)
Perfect protection function:The whole detection current and load parameters, with the flow, overload, underload, overheating, broken phase, short circuit, three-phase current unbalance, phase sequence detection and leakage detection function of microcomputer protection.
(XI)
Friendly man-machine interface:LCD panel, with two kinds of Chinese and English display interface, making programming and parameter adjustment more convenient. Fault real-time monitoring is more intuitive, improve the work efficiency.
4,Installation and conditions of use(I)
Installation conditions:To ensure that the soft starter with good ventilation and cooling conditions in use, the soft starter should be mounted vertically. Around the equipment required to leave enough space when installed inside the door can be opened to facilitate future maintenance.
(II)
Conditions of Use
Control Power |
AC110V,AC220V±15% 50/60Hz |
Three-phase power |
AC380V±15%,AC660V±15%,AC1140V±30% |
Nominal current |
15~1200A, A total of 24 kinds of ratings
|
Motor Power |
between 7.5 and 1200kW |
Applicable motor |
Squirrel cage induction motor |
Starting method |
Current limiting start, voltage index curve, voltage linear curve, current index curve, current linear curve |
Stop mode |
Free stop, soft stop, brake brake, soft stop and brake brakes |
Logic input |
Impedance 1.8kΩ, power + 15V |
Protection |
Overcurrent, overload, underload, overheating, open phase, short circuit, three-phase current unbalance, phase detection, leakage detection etc. |
Protection class |
IP20 |
Cooling method |
Natural cooling or forced air cooling |
Installation |
Wall-mounted vertically inside |
Environment |
More than 2000 meters above sea level, should reduce capacity applicable; Ambient temperature between -25 and 45 ºC; Humidity less than 95%; Non-flammable, explosive, corrosive gas, no conductive dust and no greasy; Chamber installation, ventilation, vibration less than 0.5.
|
5,
Circuit connection(I)
The basic wiring diagram(II)
Main circuit wiring diagram(III)
Typical application wiring diagramNote: for reference only, specific project design, do be adjusted accordingly.