XZS560 petrol strimmer |
Model XZS560 |
Gasoline Engine TH23-DX |
Speed idle speed (rpm) 3000 |
Maximum speed (rpm) 11000 |
Displacement (cc) 23.6 |
Fuel tank capacity (l) 0.47 |
The minimum fuel consumption rate (g / kwh) 449 |
Maximum output power (kw / rpm) 0.74 / 7500 |
Reduction ratio 5.11 |
Dimension (L × W × H) (mm) 1074 × 266 × 207 |
Machine weight (kg) 5.64 |
Engine: |
2-stroke,air-cooled |
Displacement: |
23.6 |
standard power |
0.65KW |
Blade length: |
750mm |
Two-cycle oil/Gasoline mixing ratio: |
1:25 |
Packing: |
depend on clients |
Descriptions:
1. Adjustable hedge trimmer handle within 180 degrees
2. Double reciprocation blade action
3. The exhaust pipe of the silencer was lengthened; The handle can be rotated
4. Front handle use the dip coating processing, beautiful appearance, comfortable operation.
5. The operating handle design is fully application of human body engineering. More accord with human body operation.
6. Using high quality rubber as shock absorption material, better reduce the labor intensity of the operators.
7. The machine well designed for the family with the concept of light weight, simple structure and easy operation.
8. Exclusively designed for powerful, efficient cutting to hedges and shrubs. Low weight and excellent cutting performance are both key for shaping delicate ornamental and woody hedges.
9. With the concept of light weight , simple structure, pretty outlook and easy operation.
Mechanical Maintenance of common sense:
1. Gasoline prohibit speeding and should be shut down at low speeds.
2, the oil to the right, genuine, clean gasoline to clean, fresh.
3, non-professionals can not adjust the carburetor. We must adjust, generally
After the needle gently clockwise to tighten, then counterclockwise twist 1.5-1.75 weeks.
4, the air filter should always check with soapy water or regularly
Replace.
5, 100-300 hours of operation of the gasoline engine, the application of wood or bamboo Clear
Coke once. Remove the cylinder head when cleared, remove the cylinder, cylinder head, live
Plugs, valves, etc. attached to carbon. Coke not enter the bore and the valve
Seat.
6, to maintain clean cylinder gasoline engine especially fins.
7, refueling, inspection, repair, maintenance, you should disconnect the spark plug cap, not
To smoke, away from open flame.
8, not in the operating room. In addition to the operator when the machine is working outside, unrelated persons
Leave the machine more than 15 meters.
9, before and after each use machine inspection section and other parts of the bolt
Tightness.
10, there is a clutch, the clutch that is exposed installation of the machine is not good
Before the gasoline engine may not start.
11, other lubricating parts of the machine, follow the instructions to add regularly needed
NOTE lubricating oil or grease.
Mechanical Maintenance of common sense:
1. Gasoline prohibit speeding and should be shut down at low speeds.
2, the oil to the right, genuine, clean gasoline to clean, fresh.
3, non-professionals can not adjust the carburetor. We must adjust, generally
After the needle gently clockwise to tighten, then counterclockwise twist 1.5-1.75 weeks.
4, the air filter should always check with soapy water or regularly
Replace.
5, 100-300 hours of operation of the gasoline engine, the application of wood or bamboo Clear
Coke once. Remove the cylinder head when cleared, remove the cylinder, cylinder head, live
Plugs, valves, etc. attached to carbon. Coke not enter the bore and the valve
Seat.
6, to maintain clean cylinder gasoline engine especially fins.
7, refueling, inspection, repair, maintenance, you should disconnect the spark plug cap, not
To smoke, away from open flame.
8, not in the operating room. In addition to the operator when the machine is working outside, unrelated persons
Leave the machine more than 15 meters.
9, before and after each use machine inspection section and other parts of the bolt
Tightness.
10, there is a clutch, the clutch that is exposed installation of the machine is not good
Before the gasoline engine may not start.
11, other lubricating parts of the machine, follow the instructions to add regularly needed
NOTE lubricating oil or grease.
Mechanical Maintenance of common sense:
1. Gasoline prohibit speeding and should be shut down at low speeds.
2, the oil to the right, genuine, clean gasoline to clean, fresh.
3, non-professionals can not adjust the carburetor. We must adjust, generally
After the needle gently clockwise to tighten, then counterclockwise twist 1.5-1.75 weeks.
4, the air filter should always check with soapy water or regularly
Replace.
5, 100-300 hours of operation of the gasoline engine, the application of wood or bamboo Clear
Coke once. Remove the cylinder head when cleared, remove the cylinder, cylinder head, live
Plugs, valves, etc. attached to carbon. Coke not enter the bore and the valve
Seat.
6, to maintain clean cylinder gasoline engine especially fins.
7, refueling, inspection, repair, maintenance, you should disconnect the spark plug cap, not
To smoke, away from open flame.
8, not in the operating room. In addition to the operator when the machine is working outside, unrelated persons
Leave the machine more than 15 meters.
9, before and after each use machine inspection section and other parts of the bolt
Tightness.
10, there is a clutch, the clutch that is exposed installation of the machine is not good
Before the gasoline engine may not start.
11, other lubricating parts of the machine, follow the instructions to add regularly needed
NOTE lubricating oil or grease.
The related production