Milk Beer Beverage Apv Plate Heat Exchanger Pasteurizer

Milk Beer Beverage APV Plate Heat Exchanger Pasteurizer
Description :

Each unit consists of a series of grooved plates that are individually gasketed and pressed tightly together by compression bolts within a frame. Fluids enter and exit the PHE through portholes in one or both ends of the frame. Within the unit, the fluid to be heated or cooled flows down one side of each plate, while the heating or cooling medium flows in the opposite direction across the other side. The huge temperature difference created by these opposite flows allows maximum heat transfer efficiency for closest possible approach temperature .






Products Feature
1,High Efficiency with Life Cycle Support
its heat transfer coefficient is 3-5 times as large as that of shell-and-tube heat exchanger, reaching 7,000W/m2K at the most.
2,High Heat Transfer Rates
Plate heat exchanger can realize full countercurrent form the temperature correction coefficient is 1 degree centigrade
3,Modularity For Flexibility
The exchangers can easily be disassembled for inspection, maintnance or even expansion by adding plates
4,Compact Design
the floor area occupied by plate heat exchanger is approximately one fifth to one tenth of the area occupied by shell-and-tube heat exchanger, given that the same heat exchange task is fulfilled by them.
5,Self-Cleaning Action
The plate turbulence also enhances the effectiveness of water backflushing and cleaning in place (CIP) procedures
with less frequent need to disassemble the exchange
6,Easy to maintance
The unit opens within its own footprint simply by loosening the tie-rod bolts
and rolling the movable frame back to the support column

Component Material:
Heat-exchange plate: SUS304, SUS316L, SMO254, titanium, nickel, Hastelloy alloy
Gasket seal: NBR, H-NBR, EPDM, food pad, fluorine rubber, silicon rubber
Frame: Carbon steel, stainless steel, coated stainless steel
Clamping bolt: Galvanized carbon steel, stainless steel
Interface: Rubber, carbon steel, stainless steel
Guide bar: Galvanized carbon steel, stainless steel
 

How does a Plate Heat Exchanger Work?
Each unit consists of a series of grooved plates that are individually gasketed and pressed tightly together by compression bolts within a frame.
Fluids enter and exit the PHE through portholes in one or both ends of the frame. Within the unit, the fluid to be heated or cooled flows down one side of each plate,
while the heating or cooling medium flows in the opposite direction across the other side. The huge temperature difference created by these opposite flows allows maximum heat transfer efficiency for closest possible approach temperature .



Company and Workshop :

GuangzhouJiema is focus on the heat exchanger and spare parts manufacturer . We own the whole precdure manufactuering from mould , plate , gasket , whole heat exchanger in JIEMA Group , welcome to visit us : www.jiema-heatexchangers.com

We also provided technical service such as technical consultation, equipment update,capacity expansion scheme, maintenance and cleaning of the equipment.

Our objective is to supply you the correct specification of material to suit your particular application.

Certificate :




About Warranty
We promise 10 year guarantee, all reasonable relevant cost will be undertaken by us in the first year if our heat exchanger fail to work due to quality problem,
only the free repairing operation guide is available in the rest of the 9 years via E-mail /Fax/Phone


FAQ :

1. Q: How long can we deliver goods?
A: It would be 15-25 days after payment and drawing sketch confirmed

2. Q: Can your company supply after-sales warranty?
A: Yes, we can supply 1 year after-sales warranty against B/L date.

3. Q: What payment terms can you accept?
A: We can accept L/C, T/T, etc.

4. Q: Can you accept customized order?
A: Yes, we accept, we have very professional technical group who can design the special products according to your basic parameter/ data sheet/ drawings or sample.

5. Q: Do you have your own factory or just you are a trading company?
A: We are direct factory group , one is Guangzhou City , Guangdong Province , another is in Huanggang City , Hubei Province.

6. Q: Is OEM order acceptable to your company?
A: Yes , OEM is OK.