Negotiable
The date of payment from buyers deliver within days
Shandong
Long-term effective
2017-11-23 04:03
286
Company Profile
By certification [File Integrity]
Contact：Mr. Boan(Mr.)
Email：
Telephone：
Phone：
Area：Shandong
Address：Shandong
Website： http://qdhaocheng.artstx.com/
| Grade | thickness(mm) | width(mm) | length(m) | color |
| architecture | 0.38 | 600~2500 | 400 | clear, milk white, full color |
| 0.76 | 600~2500 | 200 | ||
| 1.14 | 600~2500 | 150 | ||
| 1.52 | 600~2500 | 100 | ||
| automotive | 0.76 | 600~1600 | 200 | clear |
| 600~1000(band length:0-230) | green striped, bule striped, grey striped |
| Thickness | 0.76mm | |
| Appearance | Surface | Smooth surface without Nick,Crease,Bond; The color band should be evenly distributed and the width of transitional region is equalized |
| Band Color | Clear, Blue,Green ,Gray & others | |
| Crystallite and watermarks | Crystallite Diameter exceed 2.0mm is not allowed. No visible watermarks. | |
| Visible defects (impurities, bubbles, oil, drop etc.) | Defects Diameter exceed 0.5mm and allowed maximum 6 defects per 200m |
|
| Defects Diameter exceed 0.5mm to tag on PVB film; Diameter less than 0.5mm in the Intensive defects area* must tag on one defect. The defects marks and places should be showed in the packing list. | ||
| Thickness tolerance(mm) | Plus or Minus 0.04mm | |
| Thickness and size | Uniformity ratio | At any two points from 25mm distance either horizontally or vertically of the thickness tolerance is less than 15mm; (or 50mm - less than 25mm; or 100mm - less than 50mm) |
| Length (m) | Normal length | |
| Width (mm) | Normal width | |
| Roughness Rz | 15 -70 | |
| Moisture content (%) | 0.35 - 0.55 | |
| Heat shrinkage rate ( 60ºC/15min) (%) |
8.0 Max | |
| Pummel value | 7 Max | |
| Light transmittance (%) | 85 Min | |
| Haze (%) | 0.2 - 0.4 | |
| UV Screening, up to 380nm (%) | 99 | |
| Tensile strength (MPa ) | 20.0 Min | |
| Tensile elongation (% ) | 200 Min | |
| Yellowness index (%) | 10 Max | |
| *Intensive defects area: Within the 300mm diameter circle, the defect numbers is over 10 and its interval less than 5 mm. | ||
|
Safety Laminated glass may break, fragments of glass stay tightly bonded to its interlayer, reducing the risk of injuries. For this reason, this type of glass is required for windshields of vehicles and for overhead glazing by most building codes. |
|
Security It can be made of multiple layers of thick glass and interlayer, to let it withstand bomb blasts and bullets. |
|
Sound reduction This glass has the ability to prevent unwanted noise with its sound reduction index, which is higher than that of monolithic glass that has the same thickness. |
|
Control of solar energy While skylights and the like provide natural light, they can cause glare and too much heat, which can increase air conditioning costs. |
|
Control of UV rays UV rays cause the fading of furnishings. The interlayer of this glass has UV absorbing properties to screen out these damaging rays. |
