Silicon Carbide Cyclone Liner as Abrasive Wear Resistance Materials

>> Chemshun Silicon Carbide Cyclone Liner Introduction

Sintered alpha silicon carbide is produced by sintering ultra-pure sub-micron powder. This powder is mixed with non-oxide sintering aids, then formed into complex shapes by a variety of methods and consolidated by sintering at temperature above 3633 degrees Fahrenheit
 
The sintering process results in a single-phase fine-grained silicon carbide that is very pure and uniform, with virtually no porosity enabling the materials to withstand corrosive environments, abrasive environments, and environments operating under high temperature (2552 degrees Fahrenheit). These properties make sintered alpha silicon carbide ideal for applications such as cyclone liner.
 
 >> Product character:
 
-- Low density, High strengt
-- Good high temperature strength (Reaction bonded)
-- Oxidation resistance (Reaction bonded)
-- Excellent thermal shock resistance
-- High hardness and wear resistance
-- Excellent chemical resistance
-- Low thermal expansion and high thermal conductivity
 
>> Technical data :
 
 >> Chemshun Ceramics can offer cyclone liner with kinds of materials : Alumina ceramic cylone liner and silicon carbide cyclone liner