Portable Digital Multimeter (MG3711) with High Quality

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Jiangsu

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-30 17:26

  • Browse the number:

    303

Send an inquiries

Company Profile

Shenzhen Slinya Electronic Co., Ltd.

By certification [File Integrity]

Contact:Miss Claire Cao(Mr.)  

Email:

Telephone:

Phone:

Area:Jiangsu

Address:Jiangsu

Website: http://njkhmeter.artstx.com/

Product details
  1. Introduction
This instrument is a handheld and battery operated Digital Multi Meter(DMM) with multi function. This Meter is designed to meet IEC61010-1 & CAT II 600V over voltage category and double insulation. The meter with holster that is giving the main body, though downsized, high resistance against the shock of a drop.This operating instruction covers information on safety and caution. Please read relevant information carefully and observe all the warnings and note strictly.
The DMM as general measurement tool and widely used in the school, laboratory, factory and other social field.
 
  1. Safety note
 Warning
To avoid possible electric shock or personal injury and to avoid possible damage to the meter or to the equipment under test, adhere to the following rule:
 
  • Do not apply more than the rated voltage, of marked on the meter, between the input terminal and grounding terminal..
  • Do not apply voltage between COM and OHM terminal, in the resistance measuring state.
  • Do not measure current with test lead inserted into voltage or OHM terminal.
  • Do not expose the instrument to the direct sun light, extreme temperature and humidity or dew full.
  • Inspect the test lead for damaged insulation or exposed metal.
  • Before measuring current, check the Meter's fuses and turn off power to the circuit before connecting the meter to the circuit.
  • Disconnect circuit power and discharge all high voltage capacitors before testing continuity, diode, resistance, capacitance or current.
 Explanation of controls and indicators
3-1. Meter illustration 
 
 
  1. LCD display
  2. "FUNC" Push button
  3. "BACK LIGHT" push button and 'HOLD" push button
  4.  Rotary Switch (Knob)
  5. "V/Ω/HZ/uA/mA"Input terminal
  6. "COM" input terminal
  7. "10A" input terminal
  8. Non contact voltage sensing area (top of instrument)
 
3-2. Functional push button
 
Push button Function
Func "FUNC" key is the function select key that acts with trigger. Use the key as switch of DC/AC current, Diode.
  HOLD Press "HOLD " to enter and exit the hold mode in any mode. That act with trigger. "HOLD "This key is used control Backlight. This key is act with trigger. When press and hold the key over 2 sec, will enable Backlight.
Press the key again , the backlight will disable.
  1. LCD display
  2. "FUNC" Push button
  3. "BACK LIGHT" push button and 'HOLD" push button
  4.  Rotary Switch (Knob)
  5. "V/Ω/HZ/uA/mA"Input terminal
  6. "COM" input terminal
  7. "10A" input terminal
  8. Non contact voltage sensing area (top of instrument)
 
3-2. Functional push button
 
Push button Function
Func "FUNC" key is the function select key that acts with trigger. Use the key as switch of DC/AC current, Diode.
  HOLD Press "HOLD " to enter and exit the hold mode in any mode. That act with trigger. "HOLD "This key is used control Backlight. This key is act with trigger. When press and hold the key over 2 sec, will enable Backlight.
Press the key again , the backlight will disable.
  
 
4.Specification
4-1. General Specification
Auto ranging DMM , that full scale is 2000 counts
Display : 3 1/2 digit LCD display..
Over load protection: Used the PTC protection circuit for Resistance, frequency measurement for.
DATA HOLD function
Back Light
Low battery indication
Auto Power- OFF. : If the meter is idle for 15 minutes (idle time), the meter automatically turns the power off. After auto power-off, pushing any of the push button or changing the rotary switch can turn on the meter again.
NOTE: (1) After auto power off in the AC mode, if changing the rotary switch to the DC mode, the Re-power on if disabled.
(2) The meter enters sleep mode after quto power off. If press "HOLD" push button to re-power on in the sleep mode, the auto power off function is disabled.
Operating temperature & Humidity:
0 ~ 40ºC (32 ~104 ºF) & < 80% RH
Storage temperature & Humidity:
 -10 ~ 50ºC (14 ~ 122 ºF) & <70%RH
Power Supply: 9V Battery(6F22 or 1604A Type) x 1pc.
Safety Class: IEC 61010-1, CAT II 600V.
Dimension(L x W x H) & Weight:140 x 67 x 30mm, Approx. 112g