Hot Selling Big Capacity Fire Bladder Tank for Foam Solution
The PHYM series Bladder Foam Tank is to provide foam solution for fire foam system. It is mainly consist of pressure tank, bladder, proportioner, control valves, pressure gauge and pipelines. High-pressure water is needed to swap out foam concentrate (stored in bladder in the tank) from the tank as a certain proportion. Foam concentrate then mix with pressurized water and form foam solution. For bladder is separated from the water that it can be utilized next time if not finished. Besides, there is feed inlet to refill or rechange foam concentrate.
Working Principle:When pressurized water flow through the proportioner, a small part of water (3%~6%) flow into tank from water inlet and press bladder to swap out equal foam concentrate to mix with another part of water (97%~94%) in proportioner. Foam solution flows out from outlet and was supplied to foam generators or foam nozzles through pipelines.
Application: 
The unit usually constitutes foam spray system and low/high expansion foam extinguishing system with pipelines, foam generators and foam nozzles. This unit provides foam solution for these systems through pipelines which are distributed in all destination areas and they are connected with generators or foam nozzles. The system works once there is fire somewhere and solution was transported to destination area through pipelines. Thus destination area gets foam solution to put out fire with foam generators or foam nozzles.
Characteristic:
1. Big flow pressure range and small pressure loss.
2. Widely used both in mid-multiples and low multiples foam extinguishing system.
3. Two types: horizontal and vertical.
Technical parameters:
| Working Pressure Range |
0.6~1.2MPa |
| Pressure Drop |
0.2MPa |
| Test Pressure |
Intensity |
1.5MPa |
| Seal |
1.32MPa |
| Tank Capacity |
500~10000L |
| Size of Proportioner |
DN80~DN250 |
| Flow Rate |
4~360L/S |
| Mixing Ratio |
3% or 6% |
Notes: we make available customized design for our clients
FAQ:
(1). Q: What is your product range?
A: We have manufactured the foam system, sprinkler system, water mist system, fire hydrants, fire monitors, fire alarm valve system and other equipment since 1995.
(2). Q: Can I order sample first to test the quality?
A: Yes, sample order is accepted. We can send you the sample to test our quality.
(3). Q: How long is the delivery time?
A: 7-15 days upon receipt of payment.
(4). Q: How to pay?
A: We accept T/T, Western Union, and L/C.
Contact us:
Shenzhen Winan Industrial Development Co., Ltd.
No. 18, Fengshun Road, Tongle, Longgang District, Shenzhen City, Guangdong, China
Tel: +86 755 83543111
Fax: +86 755 89906192
Website: http://www.winanfire.com
Company Profile
