Negotiable
The date of payment from buyers deliver within days
Zhejiang
Long-term effective
2017-11-29 22:20
194
Company Profile
By certification [File Integrity]
Contact：Miss Joyce Lu(Mr.)
Email：
Telephone：
Phone：
Area：Zhejiang
Address：Zhejiang
Neoden's third generation automatic pick and place machine
TM245P series
The third generation model TM245P is Neoden Tech's independent product,with completely independent intellectual property, adopted the latest research and development of technology compared with the previous couple generation models TM220A and TM240A:
1.Automatic discharging device with electronic magnetic pressure type gear
2.Vibration feeder which can support to mount components packaged by tubes
3.Research and develop a new generation high speed drive system (equivalent to servo system)
4.Adding a new function of IC's mechanical correction
5.Automatic recover function of step out
6.Flexible PCB positioning function
Items |
TM245P-Advance |
Max Mounting Size(X×Y) |
370×390mm |
External Dimension(L×W×H) |
870×885×336mm |
Placement Head Q'ty |
2 |
Vacuum Pump Q'ty |
3 |
Negative Pressure |
-92KPA |
Max Mounting Capability |
10000CPH |
Position Accuracy |
±0.03 |
Max Movement speed |
2M/S |
Power Supply |
220V/160W(Convertible to 110V) |
Feeders |
50 |
ICs |
10 |
Max Applicable Height |
5mm |
Tape Width |
8mm,12mm,16mm |
Vibration Feeder |
1 |
Weight |
42Kg |
Features
1. Small and light weight body, desktop
2.High mounting capability, up to 10000 pcs/h
3.Dual pick and place heads, 360-degree orientation
4.Vacuum detection, automatically dispose and make up if picking fail or pick misaligned
5.4 types of high-precision nozzles
6. Noise reduction, built-in mute type pumps (cost and room saving, no need to prepare additional pump)
7.Touchable LCD screen, friendly operation interface
8. Automatic discharging device with electronic magnetic pressure type gear
9.Standard 8G SD card, mass storage of CSV working file.
10.Humanization design, customized feeders.
11.No vision system, the self-developed Laser positioning principle is quite effective for this type of machine.
12.Build-in software operating systems, converting the operating program directly from the PCB Circuit Diagram.
13.Small and lightweight: simple installation, convenient transportation.
14.Average power 160W: Environmental protection and energy saving.
Why choose our machine:
1) The customer who operates on a small-to-medium
scale will tend to opt for such a small desktop automatic pick and place system which is very convenient and easy use even without a technical assistance.
2) If the number of boards does not exceed a few hundred per working day, such a small desktop placement may well be the best choice.
3) Consider about the cost efficiency, the small desktop placement reaches its maximum cost efficiency in the middle range of production volume, particularly where full-time working is not always guaranteed.
4) A further factor which affects the choice of system is the product mix: if the boards are all customer-specific boards, each with a short or unpredictable length of run, and if production must be flexible and capable of coping with frequent changes, such small desktop placement may be best.
5)Avoid human error, more accurate and faster.
Sample Boards of Few Customers
Programming(Converting & Online Programming)
Converting from PCB Circuit Diagram or Normal file of Circuit Diagram
1. Generate coordinate CSV file form. Take software Protel Designer 6 we provide, from which we can generate Protel csv. file.
If you have Normal file, this step is not necessary.
2. Stack Management and generate PnP file
With special software Stack Management System we provide, you can open Protelor Normal file, manage stacks and their relative components, and then convert the operating program (PnP file).
This whole process only takes 5 minutes.
Online programming
If you don't have PCB Circuit diagram or its Normal file, with the assistance of laser positioner, you can easily program for mounting components on Machine , no need any computer or other devices.
