Product details
Angle Bead ( Corner Bead )have a smooth round nose bead withdiamond mesh wings for the keying of plaster right up to the nose of the bead.On the outside is the finished edge which is where one side of your drywall knife runs on when you are applying drywall mud. The two flanges sit flat on your raw drywall. The diamond decoration along the length of the flange act as a keyway for holding the drywall mud to the drywall and the corner. This mesh insures a perfect bond and provides effective reinforcement where most needed. Straight edge nose is easy to install and permits plumb straight outside corners. Excellent protection for corridor corners exposed to traffic.
Corner Bead, Plaster Stop Bead, Angle Bead
The plasterer angle beads helps the formation of joints, corners, edges and abutments which are resistant to chips, cracks and impact damage.
It will be customized according to customer requirement of different sizes.
Material: Low carbon steel, stainless steel, plastic, aluminum.
Production process: Steel cutting, pull into expansion.
Surface treament: Galvaniation, PVC coating
Feature: Ridges in the plaster works against the formation of straight edge berak or crack, and to protect and repair the most vulnerable part of the walls.
The 25mm corner bead has a solid spine designed for wallboard coners and thincoat plaster up to 3mm thick.
Common Specification:
Thickness |
Width |
Weight |
Packing |
0.40mm |
50*50mm |
130g/m |
50/box |
0.50mm |
50*50mm |
170g/m |
50/box |
0.50mm |
30*30mm |
115g/m |
50/box |
0.35mm |
45*45mm |
105g/m |
50/box |
0.40mm |
30*30mm |
120g/m |
50/box |
0.4mm |
30*30mm |
135g/m |
50/box |