Paper Surface Gypsum Board Machine with National Standard

  • Price:

    Negotiable

  • minimum:

  • Total supply:

  • Delivery term:

    The date of payment from buyers deliver within days

  • seat:

    Hebei

  • Validity to:

    Long-term effective

  • Last update:

    2017-12-06 21:55

  • Browse the number:

    185

Send an inquiries

Company Profile

Hengshui Decheng Machinery & Equipment Co., Ltd.

By certification [File Integrity]

Contact:Mr. Mao Kun(Mr.)  

Email:

Telephone:

Phone:

Area:Hebei

Address:Hebei

Website: http://decheng2.artstx.com/

Product details







DCI company specially designs and manufactures complete sets of building materials equipments, such as paper surface gypsum board machine, gypsum powder production line (natural gypsum and chemical gypsum), fiber cement board production line, calcium silicate board production line, cement production line, AAC block production line, stone production line, etc. Certainly we also supply single machines, spare parts and wearing parts for these production lines; at the same time, we produce some raw materials for the production lines, such as modified starch, foaming agent, glue, etc. 

DCI company specially designs and manufactures complete sets of building materials equipments, such as paper surface gypsum board production line, gypsum powder production line (natural gypsum and chemical gypsum), fiber cement board production line, calcium silicate board production line, cement production line, AAC block production line, stone production line, etc. Certainly we also supply single machines, spare parts and wearing parts for these production lines; at the same time, we produce some raw materials for the production lines, such as modified starch, foaming agent, glue, etc. 
Product scheme and quality standard:
Product scheme: paper surface gypsum board, in conformity with National standard GB9775-2008 (Please see Annex 1)
Standard:
8mm-18mm
Thickness: 1200mm,
Width: 2000-4500mm
Length: 2000-4500mm
Variety: ordinary paper surface gypsum board
Finished product ratio: 95%
Notes: After adjusting equipments and formula, the production line can also produce fire-resistant paper surface gypsum board, waterproof paper surface gypsum board
Quality standard (Based on 9.5mm thick gypsum board, see Annex 1 for details)
The weight per unit area 9.5 kg / m2
Longitudinal breaking load ≥360/ Newton
Horizontal breaking load ≥140/ Newton
Water content of gypsum board after drying ≤3%
Hardness Edge hardness and end hard ness should be no less than 70N
Raw material consumption (Based on 9.5mm thick gypsum board )
Gypsum powder(semi-hydrated gypsum CaSO4·1/2H2O) 6.8kg/m2
Protective paper 0.6-0.64kg/m2
Gypsum board adhesive 0.040kg/m2
Foaming agent 0.008kg/m2
Glue 0.005kg/m2
Electricity 0.3kwh/m2
Water 4.5-4.8kg/m2
Heat consumption ∽3800kcal/m2
Natural gas (8500 kcal/ m3) 0.45 m3 /m2
Note: as for fuel, using one of them; when calculating consumption of other fuels, convert with its caloric value and natural gas consumption.
Production method of gypsum board production line
Calcined gypsum powder, water and various additives are automatically and separately measured and conveyed into the mixer by continuous auto-conveying system. After well mixed into slurry and spreaded onto the gypsum board protective paper which is continuously moving forward. During the progressing process, the slurry is gradually dispersed with vibration, and jointed with back protective paper. When going through extruded shaping machine, the slurry is fully wrapped by upper and lower paper, pressing into well-regulated flat board which is continuously brought forward as per a stable and strictly controlled speed. After 4 minutes around, the calcined gypsum in the slurry is hydrated again and crystallized into tiny interpenetrative dihydrate gypsum crystal with higher strength. And then, the wet gypsum board with a certain strength and regular shape is precisely cut into individual boards with set size by an auto-controlled cutting system. The individual boards are orderly arranged, turned over by program control system and brought into the dyer. In the dryer, the absorbed water in the boards is evaporated away. following strict drying system(The crystal water in the gypsum crystal has no loss). After brought out from the dryer, the boards are gradually cooled down in the running process. The front sides of every two boards are folded after turned over again, and the two ends are cut into boards with regular size and nice appearance by end sawing machine. At the same time, the two ends of boards are packed by paper strips with fixed label. And finally the boards are conveyed to automatic stacking machine and stacked into well-ordered finished products before put into storage