1.Wall panel making machine
Technical parameters
| Basic parameter |
Model |
| TY-13-3000-90 |
| Overall dimension (L×W×H)mm |
3030*1190*2500 |
|
Total power(kw)
|
23.75 |
|
Power of heating system(kw)
|
20 |
|
Power of vibration system(kw)
|
0.75 |
|
Power of hydraulic system(kw)
|
3 |
|
Hydraulic working pressure(MPa)
|
8 |
|
Maximum hydraulic working pressure(MPa)
|
16 |
|
Capacity of hydraulic tank(L)
|
70 |
| Wall panel size and Qty |
90mm type |
10 pieces |
| 120mm type |
10 pieces |
| Diameter and number of core tube (for hollow panel) |
90mm type |
Φ59.5mm 70 tubes |
| 120mm type |
Φ74mm 60 tubes |
| Structural composition |
Host machine, hydraulic system, power distribution system, heating system, vibration system, core tubes |
2.
About Wall panel
1) wall panel samples
2> Performance index
| Item |
National standards |
Criterion of detection |
| 60mm |
90mm |
120mm |
60mm |
90mm |
120mm |
| Shock resistance /second |
≥5 |
≥5 |
≥5 |
≥8 |
≥10 |
≥15 |
| Bending failure load/Weight ratio |
≥1.5 |
≥1.5 |
≥1.5 |
≥3 |
≥4 |
≥5 |
| Compressive strength/MPa |
≥3.5 |
≥3.5 |
≥3.5 |
≥5 |
| Softening coefficiency |
≥0.80 |
≥0.80 |
≥0.80 |
≥1 |
| Consistency/Kgsqu.m |
≤70 |
≤90 |
≤110 |
≤55 |
≤70 |
≤85 |
| Drying shrinkage/mm/m |
≤0.6 |
≤0.45 |
≤0.5 |
≤05 |
| Hanging force/N |
≥1000 |
≥1200 |
≥1300 |
≥1500 |
| Sound resistance/ dB |
≥30 |
≥35 |
≥40 |
≥35 |
≥40 |
≥45 |
| Fire resistance rating/h |
≥1 |
≥2.5 |
≥3 |
≥4 |
| Heat transfer coefficient b/w/m.k |
≤1.0 |
≤1.0 |
Lightweight wall panel is 10 times lighter than clay solid brick and much lighter than hollow block so as to solve the problem of girder, big column and deep foundation. The board column connection has good seismic performance. So the wall panel is not only suitable for low-rise buildings but also suitable for high-rise buildings, soft geology and sand beach and beach buildings.
Good heat preservation performance:Many vacuum bubbles are formed in compound foaming wall panel in the production process. These bubbles formed static air layer in the materials, which makes the heat conductivity of the board only 0.12W/mk with thermal resistance value 2.00, which greatly reduce power consumption and cost of coal to save energy.
Good sound insulation and waterproof performance: Cellular structure is densely covered inside the board, which can effectively block the transmission of sound and absorb sound with sound insulation≥40dB. The waterproof, moistureproof and freeze-thaw resisting function all conform to the national standards.
Increasing usable area: Wall panel is thinner, which can increase the usable area of more than 8% to 10%.
Good installation processing performance: The wall panel can be sawn, nailed, drilled, cut and made arbitrary manufacturing building structure.
Fast construction: Dry process operation with simple and convenient installation; the board is more than 6 times faster than the block and can greatly shorten the construction period.
Good surface decorative performance:Wall panel surface is flat and can be directly wallpapered, built wall bricks and sprayed after caulking.
Low comprehensive cost: Due to the load of beams and foundation is reduced, wall panel construction will be fast with short cycle and the project cost will be reduced by 20% compared with clay brick and hollow block.
Civilized construction operation:Normative dry construction and site construction with less construction waste and high degree of construction civilization.
Environmental protection, energy saving and waste utilization: Wall panel materials do not contain toxic and harmful substances with waste recycling and energy saving function and is the green product our country promotes to develop.
3. Wall panle installation 
4. Our servicePre-sales service Accept user's consultation
Provide market investigation and project assessment
Confirm the scale of operation
Design factory construction scheme for the user
Offer factory construction drawings
Involved in factory construction drawings
Involved in factory construction process guidance
Sales service Supervise water, electricity and other infrastructure construction process
Set up management framework and make training of production management and equipment for the user
Maintenance, quality control, purchasing and marketing personnel
Offer material proportioning formula
After-sales serviceEstablish user profiles
Accept 24 hours technical consulting service
Engineers regularly make after-sales return visit
Extended service Equipment system upgrade
Equipment and mould update
The latest information
Application of new technology and new process
Solemnly promise: Lifetime maintenance for the equipment The sales service team will be responsible for after-sales service and timely provide users with convenience to make the best economic benefits of the equipments5. About us Shandong Tianyi Machinery Co., Ltd. a national high-tech enterprise covers an area of 200000 m² and owns a modernized standard workshop of 80000 m². The company is a leading enterprise which is devoted to research and solution of solid waste.
Main products:
1.EPS cement wall panel production line
2.Light wall panel production line,
3.Foamed cement insulation board production line
4.Gypsum wall panel production line
5.PC equipment
The products reach above 40% of the market share in the industry. The products are sold well all lover the country and exported to more than 30 countries and regions, such as Russia, Indonesia and Syria, etc. with a high-quality customer base of more than 4000 enterprises.
Company Profile
