Reinforcing Bar Swaging Machine and Threadless Rebar Coupler

Changzhou Jianlian Reinforcing Bar Conjunction Co.,Ltd(JBCZ)
Manufacturer under strict quality assurance plan ISO 9001
research on rebar mechanical splice since 1987

Add: hengshanqiao town, Wujin district, Changzhou City, Jiangsu Province, zip:213119, China

1. Reinforcing Bar Swaging coupler: 


2. Specifications:
The parameter for standard couplers, we can also produce according to your requirement!

3. The parameter of Reinforcing Bar Swaging Machine

4. Description of Reinforcing Bar Swaging Machine:
Reinforcing bar YJ650 cold extrusion press machine is a portable system designed to splice bars in site. It is a simple and proven method to splice bars that did not have their end shop-prepared.
The sleeve is swaged onto the bar ends by an hydraulic tool powered by a separate power unit. The resulting connection guarantees a tensile strength of at least 125% of the nominal yield strength of reinforcing bars grade 500 MPa.

Couplers are butt-to-butt splices that are suitable to both tension and compression applications.

5. Installation Instructions
1.Site Preparation : cleaning and straightening of bars.
2.Marking on the bars half the length of the sleeves.
3.Put RG coupler into the gauge length for limit gripping area and then mark on RG coupler of both sides.
4.Sample after marking show the position that we should not to do gripping out of marking area from the
middle to outside.
5.Prepare the hydraulic tool and place the proper grip mould. And prepare the hydraulic pump and connect
power. Correct motor rotation by selector switch in case of 380/440V motor.
6.Insert the sleeve half way onto the continuation bar, using the marking as guide.
7.Start applying the required pressure on the sleeve.
8.Stop the swaging at the specified pressure for the given bar diameter.
9.Repeat this process as many times as required per model.
10.Prepare as many continuation bars as needed.
11.Place the continuation bars into the sleeves of the first bar.
12.Repeat swaging process on the continuation bar.

6. Applications:
Jeddah Water Pump station in Saudi Arabia

7. Competitive Advantage:
1. For repair or retrofit works.
2.Fits any cold shear cut bar end.
3.No reduction of the cross section area of the bar.
4.All sleeves are individually marked allowing full traceability of material origin and manufacturing batch.
5.Manufactured under quality assurance ISO 9001.

8. Packing of Reinforcing Bar Swaging Machine:


9. Quality control of Reinforcing Bar Swaging coupler and application on job-site:




10. FQA: