Asccm Cast Steel Slag Pot

Asccm cast steel slag pot 

Specifications
Slag pot made from:
1. Carbon steel casting according to ASTM, BS, DIN standard.
2. With or without trunnion.
3. Volume: 5-30M3
Slag pot is a load-bearing device whose sole purpose is to collect molten or solid slag generated during metallurgical or chemical processes, to retain it during transport and to deposit it at a place of disposal.

1. Material
Cast Steelswith differing chemical compositions but defined mechanical properties play a dominant role in the manufacture of slag pots. Standard specifications of Cast Steel for slag pots may be found here:
Country
Specification
Grade
United Kingdom
BS 3100: 1991
425-A2
USA
ASTM A27
60-30
Germany
DIN 17182
GS16Mn5
Japan
JIS G7821: 2000
SC42
International
ISO 3755: 1991

2. Mechanical properties for Cast Steel slag pots are given below:
USA(MPA)Europe (MPA)
Tensile strength
>414
>448
Yield strength
>207
>241
Elongation
>24
>35
Reduction of area
>35
>40

3. Types
Name Dimension Weight Filled volume
Round Slagpot 4.440 x 3.700 x 3.050 26Ton 17CBM
Round Slagpot 5.100 x 3.260 x 3.500 33Ton 16CBM
Round Slagpot 5.350 x 4.150 x 3.250 34.3Ton 23CBM
Round Slagpot 5.200 x 4.040 x 3.050 32Ton 20CBM
Round Slagpot 4.660 x 3.600 x 3.200 26Ton 16.4CBM
Oval Slagpot 4.700 x 3.890/5.180 x 3.120 40Ton 25.5CBM
Oval Slagpot 4.065 x 3.430/4.450 x 3.050 30Ton19CBM
Round Slagpot 5.250 x 4.400 x 3.000 34.5Ton 18CBM
Oval Slagpot 3.990x4.075x2.680 21.5Ton 16CBM
Round Slagpot 4.825x4.240x3.275 38Ton 23CBM
Oval Slagpot 5.840x6.004x3.900 60Ton 45CBM
Round Slagpot 5.02x4.58x3.15 40Ton 28CBM
Oval Slagpot 4.29x3.61x3.48 35Ton 21.4CBM
Oval Slagpot 3.245x3.8x2.85 19Ton 14CBM
Petals rim Slagpot 3.4x3x2.374 13.5Ton 6.2CBM
Oval Slagpot 2.71x2.3x2.275 9Ton 6CBM

4. Delivery condition: Normalized

5. Quality assurance
The fabrication route is governed by the provisions of the implemented Quality System ISO 9001: 2000.
The standard documentation ensures the full traceability of every process step:
Manufacturer test certificates according to DIN EN 10.204 § 3.1 including chemical composition,
Mechanical properties and non-destructive examination;
Dimensional check supported with a "as-built" sketch;
Record of the quality heat treatment;