Reverse Osmosis Water Treatment System for Beverage Filling Machine

Application of our water treatment Plant:
It is applied for the production of pure water, mineral water, beverage's product water and process water. It is mainly composed of the following equipments: Pre-treatment system (multi-medium filter, active carbon filter, ion exchange, ), membrane separation system (Ultra filtration, nanometer filter, RO water treatment system, 1stage or 2 stage), sterilization system (UV sterilizer, ozone sterilizer) and so on.

Technical Flows:
Raw water tank-raw water pump-silica sand filter--active carbon filter- water softner (Sodium Ion Exchanger)-precision filter-RO system-UV sterilizer- ozone generator-finished water tank.


Features: Equipment List:

Fuctions of complete water treatment plant:
Silica Sand Filter:
It can remove the suspended solids and gluten particles in the water, thus reduce the turbidity of water.
Active Carbon Filter:
It can remove the pigment, smell and a large number of biological organisms in the water.
Sodium Ion Exchanger:
It is to remove calcium and magnesium ions in the water, so as to soften the water.
Precision filter:
It can ensure that the granularity of the water into reverse osmosis membrane is less than 0.1um.

RO system:
The device's key part is reverse osmosis membranes that is from the America, it has a good performance to eliminate salts and the high pressure pump is from a high quality pump producer in China, it's easy to handle for its simple structure. The source water, in the case that the conductivity is less than 500us/CM, can reach the national standards totally after treatment by this device, it's the most ideal equipment for water treatment.
Characteristic:
RO: reverse osmosis selected Dow or HYDRANAUTICS aromatic polyamide membrane and supporting material of glass fiber reinforced plastic pressure vessels dedicated RO membrane element 30, sub-6 installed in pressure vessel, the installation water production quantity is 30.0m3/h , water recovery rate is 70%, desalination rate is 97%
High-pressure pump: provide power to reverse osmosis, use multi-level Vertical pump.
RO protect system: set up pressure switch on inlet and outlet of the high-pressure pump.
When the pressure of the inlet is lower then the limit value (water scarcity≤0.05Mpa) or the pressure of the outlet is higher than limit value(P≥1.8Mpa),the pressure switch send signals to the control system and alarm, high-pressure pump stop running automatically, to ensure the safety of the RO system. The high-pressure pump is equipped with valve; the reverse osmosis membrane can lift pressure slowly, to avoid the damage of high-pressure water impact. RO concentrated water end set electrically operated valve, used when low-pressure rinsing. There will be auto low-pressure rinsing 10-20min when RO system stops running, to avoid deposition and fouling on the membrane surface. Regular low-pressure large flow auto cleaning of reverse osmosis system
Display: RO water product quantity display online
System control: The system use centralized control method (auto and manual two statuses).There is a process control box, operation status is clear. Each tank's liquid level.

UV sterilize:
It uses the UV to kill some bacteria that may also pass through the reverse osmosis system.
Ozone sterilizer:
Some bacteria may not be killed by UV, the sterilizer uses ozone to kill those bacteria.



 

Main Electrical Components of our water treatment system / Plant :