Negotiable
The date of payment from buyers deliver within days
Guangdong
Long-term effective
2017-07-09 16:49
243
Company Profile
By certification [File Integrity]
Contact：Miss Nancy(Mr.)
Email：
Telephone：
Phone：
Area：Guangdong
Address：Guangdong
Website： http://szcx2016.artstx.com/
IEC60695 Needle Flame Tester For Laboratory Test
Specification:
Needle Flame Tester is made according to Standard IEC60695 and GB5169, meanwhile it's a synthesis test equipment that can meet related standard requirements. It's mainly used to simulate technical evaluation interior equipment. It's applied to the risk of ignition test of electrotechnical equipment, parts and elements, also suitable for the risk of ignition test of solid electrical insulating materials or other combustible material.
Work Principle:
This device supplies a flame which would be controlled by inflicting flame, time and operation procedure of controlled circuit.
Work conditioning:
1.Work temperature is between 5ºC and 40ºC.
2.Relative humidity is not more than 85%.
3.Use standard electrical outlet. Use 250 Voltage by ten ampere /Three Phase standard electronic outlet and earthing pole needs to connect with earth wire.
Technology Parameters:
|
Technical Parameters |
Burner Angel |
0°, 20°,45° |
Flame Height |
12±1mm |
Needle burner |
Height above 35mm, Stainless steel needle Φ0.9mm-Φ0.5mm |
Standard Copper Block |
0.58±0.01g |
Check time |
23.5±1S |
Temperature Test |
MAX1050°C ±0.1% |
Thermocouple |
RS (British), Type KΦ0.5, accuracy±0.05% |
Gas variety |
Butane or purity above 95% Propane |
