Ceiling Tee grid roll forming machine
Other name: Ceiling Tee bar roll fomring machine, Ceiling joist T bar forming machine
Full automatic Ceiling Tee grid production line
Components of Whole Line:
1. Main T bar production line
2. Deputy T bar Production line
3. Wall angle production line
Technical parameter of Main Tee grid forming machine
1. Manual Un-coiler
Width of raw material: 600mm
Max Capacity: 5000kgs
Max out diameter of coil: 1500mm
Inner diameter of coil: 400-600mm
Manual with brake
2. Leveling device
Ensure the material level and straight
The width can be adjusted.
3. Main Forming System
Roller stations: 22 rows
Material of Roller: GCr12MOV
Surface of Roller: Heat treatment HRC58-60
Diameter of main shaft: 40mm #45 steel, heat treat modulation
Power of main motor: 3.0kw, 2 no.
Speed reducer: Q250, 2no.
Forming Speed: 0-40m/minute with punching (full automatic)
0-20m/minute with punching( semi automatic)
Control method: Servo motor (full automatic)
Frequency convertor (semi automatic)
4. Cutting device
A. Oil pump station 1set
B. Motor power of Oil pump station: 3.0kw with cooling system
C. Material of blade: CR12 with heat treatment HRC60-62
5. Run-out Table
Frame: 8# steel groove welded
Length: 4mx1m
Quantity: 1 PC
6. Electrical System
PLC and HMI touch Screen (Taiwan Delta or Siemens)
Automatic length measurement
Automatic quantity measurement
Length measurement: Rotary Encoder
Over current protection for control system, aviation plugs
Power: 380V 50Hz (as per local requirement)
Jacky (sales manager)
Botou Huikeyuan Engineering Control Co., Ltd.
Tel: 86-317-7668238
Fax: 86-317-3087243
Mobile: 15503170286
Website: Www. Rollformingmachine-China. Net
| Advantage of our roll forming machine |
| High quality |
| Lower cost |
| Durableness |
| High efficiency |
| Reliable working |
| Low failure rate |
| Low energy consumption |
| Trouble free after sales service |
Company Profile
