Negotiable
The date of payment from buyers deliver within days
Shandong
Long-term effective
2017-12-05 11:53
222
Company Profile
By certification [File Integrity]
Contact：Mr. Zhong Shiming(Mr.)
Email：
Telephone：
Phone：
Area：Shandong
Address：Shandong
Website： http://uni-techmachinery.artstx.com/
oil country big bore pipe threading lathe machine 
Q1322 pipe threading lathe is mainly used to cut metric,brit ish system column,taper pipe thread,
it's can also be used as a plain lathe,machining ex-circle,bore taper hole inside and outside.
Applying to oil,metallurgy,chemical industry,wanter and electricity, geological in machining the tubing,
casing,drill pipe etc.
| Outline size | |
| Length 3300mm | Width 1450mm |
| Height 1500mm | Weight 5500Kg |
| Main specification | |
| Max.taper 1:4 | Max. .piece turning diameter on machine 630mm |
| Minimum taper 1:32 | Max.length of a shaft to be machined 1000mm |
| Bed Width: | 600mm |
| Pipe diameter 30-225mm | Max. stroke of taper bar 750mm |
| Main shaft | |
| Speed steps of main shaft 12 | Bore of main shaft 225mm |
| Speed range of main shaft 20-460r/min | |
| Feeding system | |
| Feeding range in both directions each 32 | |
| Rack feeding range at a turn of main shaft | |
| Thread range in metric system 21 | Transverse 0.04-0.65mm |
| Thread range in British system 26 | Lengthwise 0.1-1.46mm |
| Screw pitch in metric system 1-15mm | Screw pitch in British system 1-14t.p.i |
| A saddle moving fast lengthwise 2.5m/min | Saddle stroke whenever the slide handwheel is turned a scale 0 .20mm |
| Rack | |
| Max.stroke of rack | Sectional size of a knife 30×30mm |
| Rack turning angle ± 90@ | Rack stroke whenever it turns at a scale 0.05mm |
| Rack stroke whenever the lower slide turns at a scale 0.05mm | A vertical distance from the main shaft center line to installation surface of a knife 30mm |
| Tailstock | |
| Apical sleeve diameter 100mm | Apical sleeve stroke 250mm |
| Apical sleeve taper number 5 me sumame | Horizontal stroke of tailstock ±15mm |
| Apical taper number 5 me sumame | |
| Power part | |
| Gear pump belt 1-800 | Fast speed motor NY80-4 1.1KW 1350r/min 380v |
| Main motor belt 4-B2240 | Cooling pump JCB-22 /0.125KW22L/min |
| Gear pump CB-B6 2.5Mpa 1450r/min | Main motor Y160M-4-B3/ 11KW1460r/min |
